| Subject | Text |
| modifying vcr to add features and functions | I am trying to find out ( I don't have any experience electronically ) if there is a method to modif |
| Well, I re-soldered the wires, but I'm guessing it doesn't matter because I popped the speaker, or c |
|
|
| Need Cap Values: Mitsubishi CS-35301 36" TV | I have a Mitsubishi 36" TV with the infamous bad capacitor problem, and two capacitors on the main p |
| Thanks for the feedback. the chemical fuses that you refer to what do they look like? Resistors with |
| Replace DP53 and CP51 with NEW components. They will check ok on your multimeter but will be probabl |
| RCA Ctc185a7 | I have here a chassis ctc 185 that has no sound good pic ,checked volts at ic 902 and it's ok, i' |
| Fault on FSP212-3F01 Rev:1 power supply - Need some Voltages | Hope someone can assist? Mum's TV 'broke' a few months ago, dead PSU. She didn't want to wait for a |
| Orion Model tv1333 Squeals, Wont Power Up ... | My parts came in today from MCM. After checking the various other components, i installed the replac |
| Old TV's have often bad solder joints.
Try to gently tap on some components (special the flyback |
| Dell D1626HT Sony trinitron monitor.. needs fix please help | okay. im a micro-electronic engineer student in australia and i'm trying to fix my friends monitor. |
| I have resoldered joints in that area but nothing happens, so what components can be faulty. there i |
| Goodmans GHD1621F2 GHD2521F2 PVR Hard Drive Fault (Ticking) | Just fixed my uncle's GHD1621F2. Symptoms were that it 'couldn't find' the hard drive - the system |
| [quote:b18826c1bb="plamensl"]Hi,
The situation is very much the same here (in Bulgaria) - same ne |
| I have an other problem | Hi, I'm a tech from Mexico, and I have the same carver HR895 but the secondary power supply is loos |
| Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
| the problem is poer supply..........it is called smps power supply ...may be the transistor in smps |
| Channel out on old Technics | This old Technics (Panasonic SA-5170) has been running forever. Yesterday it lost power. It was the |
|
|
| [quote:5804a99472]I have an Akai CT-T21N32S which will not fire up, the red LED is illuminated on th |
| There were upgrade issues with that model & quite honestly may not be worth
messing with. (kno |
| Need TV schematics "TOSHIBA 2151TF" | Hi all,
I just send this message because I'm searching without any success the schematics of the |
| Can't adjust red convergence APEX projection TV | I'm working on an APEX model GB5108 rear projection television. The red picture is pinched slightly |
| The excessive heat, probably from the output stages is likely due to excess current through the driv |
| Please help Bmw business code | Can anyone help me please to get a code for my Bmw business cd
Bmw business cd
6512-6 902 820
B |
| SONY SHUTDOWN PROBLEM | Dear sirs, your problem with the sony power supply is not that bad, The tech with the exp, that told |
| V700 compaq | search for "schematic diagram Daewoo CMC-710 b,the main circuits are useful, but de component number |
| Hi m8 thanks for your time
I'm not sure I understand what you mean, if you could be a little more |
| [quote:4cc44662a7="sbeck"]The power supply is probably bad and it makes 3 attempts at power up and g |
| I had the same problem and I solved in this way (cut & paste from nl.hobby.video newsgroup messa |
| You can convert AC to DC by using a rectifier and a power filter. The factors that depend on these t |
| Panasonic CT32G32V | Does anyone have schematics for this set.
Especially Degauss circuit/components
Degauss ciol p |